Australia Β· costs in AUD

Reverse cycle split system air conditioner
APAC S115OVR3SA- / S115IHR3SA---- Air Conditioner
APAC S115OVR3SA- / S115IHR3SA---- is a 115.3 kW reverse cycle ducted split system air conditioner registered under Australiaβs Energy Rating (GEMS) scheme (registration AAC7357).
- Energy rating (cooling)
- 1.5
- Heating: 0
- Annual electricity use
- 15,095 kWh
- Estimated running cost
- $4,830 / year
- $403 / month Β· $48,304 over 10 years
- Capacity
- 115.3 kW cooling
- 109 kW heating
27% less electricity than the median of 14 comparable 80 kW and above reverse cycle ducted split system registrations (20,602 kWh a year) in the mixed zone. Uses less than 57% of them.
Across all 3,680 air conditioner registrations sold in Australia, it uses less than 4% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the mixed zone (Richmond NSW climate: Sydney, Melbourne, Adelaide, Perth). Mixed climate zone shown by default (Sydney, Melbourne, Adelaide, Perth); switch to cold or hot. Cost = kWh Γ 32c/kWh in AUD; change the price above to your tariff.
APAC S115OVR3SA- running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 10,211 | $3,268 | $32,675 |
| Mixed zone | 15,095 | $4,830 | $48,304 |
| Hot zone | 41,988 | $13,436 | $134,362 |
At 32c/kWh. Formula: cost = annual kWh Γ price. The kWh figure is the labelβs residential estimate for that zone; commercial-profile figures are in the specifications.
Air conditioners similar to the APAC S115OVR3SA-
Technically comparable registrations: same configuration and type, capacity within 12%.
No comparable registrations from other brands.
Compare S115OVR3SA- / S115IHR3SA---- with another model
APAC S115OVR3SA- specifications
- Type
- Reverse cycle
- Configuration
- Split system
- Air distribution
- Ducted
- Indoor unit
- β
- Rated cooling capacity (35 Β°C)
- 115.30 kW
- Cooling power input
- 32.80 kW
- Rated heating capacity (7 Β°C)
- 109.00 kW
- Heating power input
- 28.70 kW
- EER, full load (tested)
- 3.37
- COP, full load (tested)
- 3.65
- Rated AEER
- 3.38
- Rated ACOP
- 3.63
- Standby power (PIA)
- 390.0 W
- Compressor
- Variable speed
- Refrigerant
- R410A
- Power supply
- Three phase
- Indoor sound power
- β
- Outdoor sound power
- β
- Demand response (AS/NZS 4755)
- No
- Country of manufacture
- Australia, Malaysia
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
APAC S115OVR3SA- zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | β | β | 22,072 | β |
| Coldresidential | residential | 1.0 | 0.0 | 10,211 | β |
| Mixedcommercial | commercial | β | β | 26,984 | β |
| Mixedresidential | residential | 1.5 | 0.0 | 15,095 | β |
| Hotcommercial | commercial | β | β | 57,105 | β |
| Hotresidential | residential | 2.0 | 0.0 | 41,988 | β |
Part-load test points (1 values)
- c__low_temp_have_full_cap_results
- No
Other model numbers on registration AAC7357
Registered together and sharing the same test results. Usually variants of the same unit.
Australian GEMS registration details
- Registration number
- AAC7357
- GEMS registration id
- 153076
- Status
- approved, available (self-reported)
- Registration expires
- 14 March 2028
- Registered for sale in
- Australia, Fiji, New Zealand
- Family
- S115OVR3SA- / S115IHR3SA -
- Regulatory standard
- [SEER Non Multi-Split >65kW] GEMS (Air Conditioners above 65kW) Determination 2022
- Test standard
- Simulation
- MEPS
- 2020
- Product class
- Class 25
Source: Australian Government Energy Rating (GEMS) registration data, DCCEEW via data.gov.au (CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. Manufacturer: rinnai.com.au. How the derived figures are calculated.