Australia · costs in AUD
Reverse cycle multi-split / vrf air conditioner, floor mounted
Kinghome KWHD(36)NK6PO Air Conditioner
Kinghome KWHD(36)NK6PO is a 10.6 kW reverse cycle multi-split / vrf air conditioner registered under Australia’s Energy Rating (GEMS) scheme (registration AAC10355).
- Energy rating (cooling)
- 3.5
- Heating: 3
- Annual electricity use
- 2,217 kWh
- 827 cooling + 1,390 heating
- Estimated running cost
- $709 / year
- $59 / month · $7,094 over 10 years
- Capacity
- 10.6 kW cooling
- 11.4 kW heating
13% less electricity than the median of 17 comparable 10 kW reverse cycle multi-split / vrf registrations (2,557 kWh a year) in the mixed zone. Uses less than 94% of them.
Across all 3,681 air conditioner registrations sold in Australia, it uses less than 47% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the mixed zone (Richmond NSW climate: Sydney, Melbourne, Adelaide, Perth). Mixed climate zone shown by default (Sydney, Melbourne, Adelaide, Perth); switch to cold or hot. Cost = kWh × 32c/kWh in AUD; change the price above to your tariff.
Kinghome KWHD(36)NK6PO running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 4,364 | $1,396 | $13,965 |
| Mixed zone | 2,217 | $709 | $7,094 |
| Hot zone | 2,596 | $831 | $8,307 |
At 32c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.
Air conditioners similar to the Kinghome KWHD(36)NK6PO
Technically comparable registrations: same configuration and type, capacity within 12%.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Carrier 38VS00418SHCSS12.5 kW heating11.2 kW cooling2,672 kWh/yr | 2.5 | $855 | |
| Toshiba MCY-MHP0405HT12.5 kW heating11.2 kW cooling2,672 kWh/yr | 2.5 | $855 | |
| Midea MV8M-100WV2N812 kW heating10 kW cooling2,776 kWh/yr | 2 | $888 | |
| LG 5MXM100MA010.3 kW heating10 kW cooling2,234 kWh/yr | 3 | $715 | |
| Actron Air MMV-100CS12 kW heating10 kW cooling2,776 kWh/yr | 2 | $888 | |
| Daikin RSUYQ4AVMA12.5 kW heating11.2 kW cooling2,555 kWh/yr | 2.5 | $818 | |
| Daikin RSUYQ4A2VMA12.5 kW heating11.2 kW cooling2,557 kWh/yr | 2.5 | $818 | |
| Hisense AVW-34HJFAH111.2 kW heating10 kW cooling2,461 kWh/yr | 3 | $788 |
Compare KWHD(36)NK6PO with another model
Kinghome KWHD(36)NK6PO specifications
- Type
- Reverse cycle
- Configuration
- Multi-split / VRF
- Air distribution
- Non-ducted
- Indoor unit
- Floor mounted
- Rated cooling capacity (35 °C)
- 10.60 kW
- Cooling power input
- 2.65 kW
- Rated heating capacity (7 °C)
- 11.40 kW
- Heating power input
- 2.85 kW
- EER, full load (tested)
- 4.12
- COP, full load (tested)
- 4.18
- Rated AEER
- 3.95
- Rated ACOP
- 3.95
- Standby power (PIA)
- 10.5 W
- Compressor
- Variable speed, Inverter
- Refrigerant
- R32
- Power supply
- Single phase
- Indoor sound power
- 64.6 dB(A)
- Outdoor sound power
- 69.1 dB(A)
- Demand response (AS/NZS 4755)
- Yes (mode 1 on off, mode 2 50 percent, mode 3 75 percent)
- Country of manufacture
- China
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
Kinghome KWHD(36)NK6PO zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | – | – | 1,113 | 1,201 |
| Coldresidential | residential | 3.5 | 2.0 | 524 | 3,840 |
| Mixedcommercial | commercial | – | – | 1,412 | 613 |
| Mixedresidential | residential | 3.5 | 3.0 | 827 | 1,390 |
| Hotcommercial | commercial | – | – | 3,168 | 136 |
| Hotresidential | residential | 4.0 | 3.5 | 2,386 | 210 |
Part-load test points (16 values)
- h__h2_ext_cap_power_rated
- 3900 W
- c__t1_half_cap_power_rated
- 860 W
- c__t1_have_min_cap_results
- No
- h__h1_half_cap_power_rated
- 1000 W
- h__h1_have_min_cap_results
- No
- h__h3_have_ext_cap_results
- No
- h__h2_have_full_cap_results
- No
- h__h2_have_half_cap_results
- No
- h__h3_have_full_cap_results
- No
- h__h3_have_half_cap_results
- No
- h__h2_ext_cap_heat_cap_rated
- 10500 W
- h__h1_half_cap_heat_cap_rated
- 5700 W
- h__h2_is_capable_extended_load
- Yes
- c__low_temp_have_min_cap_results
- No
- c__t1_half_cap_cooling_cap_rated
- 5300 W
- c__low_temp_have_half_cap_results
- No
Australian GEMS registration details
- Registration number
- AAC10355
- GEMS registration id
- 181250
- Status
- approved, available (self-reported)
- Registration expires
- 3 August 2031
- Registered for sale in
- Australia, Fiji, New Zealand
- Family
- –
- Regulatory standard
- [SEER Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
- Test standard
- AS/NZS 3823.1.4:2012
- MEPS
- 2019
- Product class
- Class 20
Source: Australian Government Energy Rating (GEMS) registration data, DCCEEW via data.gov.au (CC BY 3.0 AU). Dataset published 19 September 2026; last checked 20 September 2026. How the derived figures are calculated.