Australia · costs in AUD
Reverse cycle split system air conditioner, wall hung
Midea MFEP26VA-W/MFEP26VA-N Air Conditioner
Midea MFEP26VA-W/MFEP26VA-N is a 2.6 kW reverse cycle split system air conditioner registered under Australia’s Energy Rating (GEMS) scheme (registration AAC7522).
- Energy rating (cooling)
- 6.5
- Heating: 3.5
- Annual electricity use
- 405 kWh
- 133 cooling + 272 heating
- Estimated running cost
- $130 / year
- $11 / month · $1,296 over 10 years
- Capacity
- 2.6 kW cooling
- 2.7 kW heating
25% less electricity than the median of 192 comparable 2.5 kW reverse cycle split system registrations (544 kWh a year) in the mixed zone. Uses less than 98% of them.
Across all 3,681 air conditioner registrations sold in Australia, it uses less than 96% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the mixed zone (Richmond NSW climate: Sydney, Melbourne, Adelaide, Perth). Mixed climate zone shown by default (Sydney, Melbourne, Adelaide, Perth); switch to cold or hot. Cost = kWh × 32c/kWh in AUD; change the price above to your tariff.
Midea MFEP26VA-W running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 776 | $248 | $2,483 |
| Mixed zone | 405 | $130 | $1,296 |
| Hot zone | 427 | $137 | $1,366 |
At 32c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.
Air conditioners similar to the Midea MFEP26VA-W
Technically comparable registrations: same configuration and type, capacity within 12%.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| LG WS09TWU / WS09TWN3.2 kW heating2.6 kW cooling584 kWh/yr | 4 | $187 | |
| Kaden KSI092.7 kW heating2.6 kW cooling473 kWh/yr | 5 | $151 | |
| Kaden KS092.8 kW heating2.6 kW cooling537 kWh/yr | 4.5 | $172 | |
| Rinnai HONRPX25/HINRPX25M3.3 kW heating2.6 kW cooling491 kWh/yr | 6 | $157 | |
| TCL TAC-10CHSD/XA72IG3.3 kW heating2.6 kW cooling551 kWh/yr | 5 | $176 | |
| TECO TWS-TSO26H3DVKT3.3 kW heating2.6 kW cooling566 kWh/yr | 4.5 | $181 | |
| Kogan KASSSAC26TB3.3 kW heating2.6 kW cooling551 kWh/yr | 5 | $176 | |
| Kogan KASSSAC26T*3.3 kW heating2.6 kW cooling551 kWh/yr | 5 | $176 |
Compare MFEP26VA-W/MFEP26VA-N with another model
Midea MFEP26VA-W specifications
- Type
- Reverse cycle
- Configuration
- Split system
- Air distribution
- Non-ducted
- Indoor unit
- Wall hung
- Rated cooling capacity (35 °C)
- 2.60 kW
- Cooling power input
- 0.49 kW
- Rated heating capacity (7 °C)
- 2.70 kW
- Heating power input
- 0.49 kW
- EER, full load (tested)
- 5.29
- COP, full load (tested)
- 5.46
- Rated AEER
- 5.27
- Rated ACOP
- 5.51
- Standby power (PIA)
- 1.0 W
- Compressor
- Variable speed, Inverter
- Refrigerant
- R32
- Power supply
- Single phase
- Indoor sound power
- 50.5 dB(A)
- Outdoor sound power
- 56.5 dB(A)
- Demand response (AS/NZS 4755)
- Yes
- Country of manufacture
- China
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
Midea MFEP26VA-W zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | – | – | 90 | 228 |
| Coldresidential | residential | 6.5 | 3.5 | 84 | 692 |
| Mixedcommercial | commercial | – | – | 161 | 124 |
| Mixedresidential | residential | 6.5 | 3.5 | 133 | 272 |
| Hotcommercial | commercial | – | – | 438 | 27 |
| Hotresidential | residential | 7.0 | 4.0 | 385 | 42 |
Part-load test points (25 values)
- c__t1_min_cap_power_rated
- 178 W
- h__h1_min_cap_power_rated
- 168 W
- h__h2_ext_cap_power_rated
- 1228 W
- c__t1_half_cap_power_rated
- 218 W
- c__t1_have_min_cap_results
- Yes
- h__h1_half_cap_power_rated
- 235 W
- h__h1_have_min_cap_results
- Yes
- h__h3_have_ext_cap_results
- No
- h__h2_have_full_cap_results
- No
- h__h2_have_half_cap_results
- No
- h__h3_have_full_cap_results
- No
- h__h3_have_half_cap_results
- No
- h__h1_min_cap_heat_cap_rated
- 1018 W
- h__h2_ext_cap_heat_cap_rated
- 3740 W
- h__h1_half_cap_heat_cap_rated
- 1415 W
- h__h2_is_capable_extended_load
- Yes
- c__low_temp_min_cap_power_rated
- 105 W
- c__t1_min_cap_cooling_cap_rated
- 1003 W
- c__low_temp_full_cap_power_rated
- 447.86 W
- c__low_temp_half_cap_power_rated
- 148 W
- c__t1_half_cap_cooling_cap_rated
- 1350 W
- c__low_temp_have_half_cap_results
- Yes
- c__low_temp_min_cap_cooling_cap_rated
- 1048 W
- c__low_temp_full_cap_cooling_cap_rated
- 2800.2 W
- c__low_temp_half_cap_cooling_cap_rated
- 1439 W
Australian GEMS registration details
- Registration number
- AAC7522
- GEMS registration id
- 154319
- Status
- approved, available (self-reported)
- Registration expires
- 21 May 2028
- Registered for sale in
- Australia, Fiji, New Zealand
- Family
- –
- Regulatory standard
- [SEER Non Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
- Test standard
- AS/NZS 3823.1.1:2012
- MEPS
- 2019
- Product class
- Class 8
Source: Australian Government Energy Rating (GEMS) registration data, DCCEEW via data.gov.au (CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. How the derived figures are calculated.