Australia · costs in AUD

Reverse cycle multi-split / vrf air conditioner

Mitsubishi Electric PUMY-P200YKMD2-A-BS Air Conditioner

Mitsubishi Electric PUMY-P200YKMD2-A-BS is a 22.4 kW reverse cycle ducted multi-split / vrf air conditioner registered under Australia’s Energy Rating (GEMS) scheme (registration AAC7056).

c/kWh
Energy rating (cooling)
2.5
Heating: 2
Annual electricity use
6,203 kWh
2,310 cooling + 3,893 heating
Estimated running cost
$1,985 / year
$165 / month · $19,850 over 10 years
Capacity
22.4 kW cooling
25 kW heating

29% more electricity than the median of 18 comparable 20 kW reverse cycle ducted multi-split / vrf registrations (4,797 kWh a year) in the mixed zone. Uses less than 17% of them.

Across all 3,680 air conditioner registrations sold in Australia, it uses less than 13% (this compares very different sizes, so the cohort figure above is the useful one).

coolingheatingClick a zone to use it across the page.

Annual kWh is the government label figure for a residential user in the mixed zone (Richmond NSW climate: Sydney, Melbourne, Adelaide, Perth). Mixed climate zone shown by default (Sydney, Melbourne, Adelaide, Perth); switch to cold or hot. Cost = kWh × 32c/kWh in AUD; change the price above to your tariff.

Mitsubishi Electric PUMY-P200YKMD2-A-BS running cost by climate zone

Climate zonekWh / yearPer year10 years
Cold zone 12,287$3,932$39,318
Mixed zone 6,203$1,985$19,850
Hot zone 7,373$2,359$23,594

At 32c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.

Air conditioners that use less electricity

Same configuration and type, cooling capacity within 12% of 22.4 kW, at least 3% lower annual kWh in the mixed zone.

ModelStarsEst. cost / yrCompare
Panasonic U-8ME2R825 kW heating22.4 kW cooling3,915 kWh/yr3$1,253
Panasonic U-8ME2R8E25 kW heating22.4 kW cooling3,915 kWh/yr3$1,253
iCongo AU-V215W/N4-G0126.1 kW heating21.5 kW cooling4,147 kWh/yr4$1,327
Midea MDV-V250WN1D(AU)-R25 kW heating20 kW cooling4,448 kWh/yr3.5$1,423
Midea MDV-V250WN1D(AU)-A25 kW heating20 kW cooling4,448 kWh/yr3.5$1,423

Air conditioners similar to the Mitsubishi Electric PUMY-P200YKMD2-A-BS

Technically comparable registrations: same configuration and type, capacity within 12%.

ModelStarsEst. cost / yrCompare
Samsung Electronics AM080FXMDGH/EU25 kW heating22.4 kW cooling6,041 kWh/yr1.5$1,933
Panasonic U-8ME2R8E25 kW heating22.4 kW cooling3,915 kWh/yr3$1,253
Haier AV08IMAURA25 kW heating22.4 kW cooling6,334 kWh/yr2$2,027
Braemar MCRX224D313B22.4 kW heating22.4 kW cooling5,364 kWh/yr2$1,716
Mitsubishi Heavy Industries FDC224KXZRE222.4 kW heating22.4 kW cooling5,671 kWh/yr2$1,815
Braemar MCHX224D313B22.4 kW heating22.4 kW cooling4,797 kWh/yr2.5$1,535
Gree GMV-224WM/C-X(A) / GMV-NDR22P/X1-T22.4 kW heating22.4 kW cooling4,797 kWh/yr2.5$1,535
Panasonic U-8ME2R825 kW heating22.4 kW cooling3,915 kWh/yr3$1,253

Compare PUMY-P200YKMD2-A-BS with another model

Mitsubishi Electric PUMY-P200YKMD2-A-BS specifications

Type
Reverse cycle
Configuration
Multi-split / VRF
Air distribution
Ducted
Indoor unit
–
Rated cooling capacity (35 °C)
22.40 kW
Cooling power input
6.90 kW
Rated heating capacity (7 °C)
25.00 kW
Heating power input
6.45 kW
EER, full load (tested)
3.41
COP, full load (tested)
4.06
Rated AEER
3.23
Rated ACOP
3.85
Standby power (PIA)
12.6 W
Compressor
Variable speed, Inverter
Refrigerant
R410A
Power supply
Three phase
Indoor sound power
–
Outdoor sound power
70.3 dB(A)
Demand response (AS/NZS 4755)
Yes
Country of manufacture
Thailand

Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.

Mitsubishi Electric PUMY-P200YKMD2-A-BS zoned energy rating figures

As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.

ZoneCooling starsHeating starsCooling kWhHeating kWh
Coldcommercial––3,2773,492
Coldresidential2.51.51,47610,811
Mixedcommercial––4,1211,731
Mixedresidential2.52.02,3103,893
Hotcommercial––9,163362
Hotresidential2.52.06,806567
Part-load test points (20 values)
h__h2_ext_cap_power_rated
7700 W
c__t1_half_cap_power_rated
2650 W
c__t1_have_min_cap_results
No
h__h1_half_cap_power_rated
2950 W
h__h1_have_min_cap_results
No
h__h3_have_ext_cap_results
No
h__h2_have_full_cap_results
No
h__h2_have_half_cap_results
No
h__h3_have_full_cap_results
No
h__h3_have_half_cap_results
No
h__h2_ext_cap_heat_cap_rated
19000 W
h__h1_half_cap_heat_cap_rated
12500 W
h__h2_is_capable_extended_load
Yes
c__low_temp_full_cap_power_rated
6306.6 W
c__low_temp_half_cap_power_rated
2422.1 W
c__low_temp_have_min_cap_results
No
c__t1_half_cap_cooling_cap_rated
11200 W
c__low_temp_have_half_cap_results
No
c__low_temp_full_cap_cooling_cap_rated
24124.8 W
c__low_temp_half_cap_cooling_cap_rated
12062.4 W

Other model numbers on registration AAC7056

Registered together and sharing the same test results. Usually variants of the same unit.

Australian GEMS registration details

Registration number
AAC7056
GEMS registration id
148741
Status
approved, available (self-reported)
Registration expires
28 September 2027
Registered for sale in
Australia, New Zealand
Family
PUMY-P200YKMD2-A Series
Regulatory standard
[SEER Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
Test standard
AS/NZS 3823.1.4:2012
MEPS
2019
Product class
Class 20

Source: Australian Government Energy Rating (GEMS) registration data, DCCEEW via data.gov.au (CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. Manufacturer: MitsubishiElectric.com.au. How the derived figures are calculated.