Australia · costs in AUD
Reverse cycle multi-split / vrf air conditioner
Panasonic U-10MF3R7 Air Conditioner
Panasonic U-10MF3R7 is a 28 kW reverse cycle multi-split / vrf air conditioner registered under Australia’s Energy Rating (GEMS) scheme (registration AAC7656).
- Energy rating (cooling)
- 4
- Heating: 4
- Annual electricity use
- 5,199 kWh
- 1,996 cooling + 3,203 heating
- Estimated running cost
- $1,664 / year
- $139 / month · $16,637 over 10 years
- Capacity
- 28 kW cooling
- 31.5 kW heating
23% less electricity than the median of 32 comparable 25 kW reverse cycle multi-split / vrf registrations (6,791 kWh a year) in the mixed zone. Uses less than 91% of them.
Across all 3,680 air conditioner registrations sold in Australia, it uses less than 17% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the mixed zone (Richmond NSW climate: Sydney, Melbourne, Adelaide, Perth). Mixed climate zone shown by default (Sydney, Melbourne, Adelaide, Perth); switch to cold or hot. Cost = kWh × 32c/kWh in AUD; change the price above to your tariff.
Panasonic U-10MF3R7 running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 10,115 | $3,237 | $32,368 |
| Mixed zone | 5,199 | $1,664 | $16,637 |
| Hot zone | 6,096 | $1,951 | $19,507 |
At 32c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.
Air conditioners similar to the Panasonic U-10MF3R7
Technically comparable registrations: same configuration and type, capacity within 12%.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Mitsubishi Electric PUMY-P250YBM2-A-BS31.5 kW heating28 kW cooling6,606 kWh/yr | 2.5 | $2,114 | |
| Mitsubishi Heavy Industries FDC280KXZPE128 kW heating28 kW cooling6,553 kWh/yr | 2.5 | $2,097 | |
| Mitsubishi Heavy Industries FDC280KXZME128 kW heating28 kW cooling6,561 kWh/yr | 2.5 | $2,100 | |
| Daikin REYA10AYM31.5 kW heating28 kW cooling6,052 kWh/yr | 3 | $1,937 | |
| Mitsubishi Electric PUMY-P250YBM2-A31.5 kW heating28 kW cooling6,606 kWh/yr | 2.5 | $2,114 | |
| Toshiba MMY-MUP10S1HT8P-A31.5 kW heating28 kW cooling6,332 kWh/yr | 3 | $2,026 | |
| Hitachi RAS-100RNCBLW31.5 kW heating28 kW cooling6,546 kWh/yr | 2.5 | $2,095 | |
| Toshiba MMY-MUP1001FT8P-A28 kW heating28 kW cooling6,104 kWh/yr | 4 | $1,953 |
Compare U-10MF3R7 with another model
Panasonic U-10MF3R7 specifications
- Type
- Reverse cycle
- Configuration
- Multi-split / VRF
- Air distribution
- Ducted or non-ducted
- Indoor unit
- –
- Rated cooling capacity (35 °C)
- 28.00 kW
- Cooling power input
- 6.23 kW
- Rated heating capacity (7 °C)
- 31.50 kW
- Heating power input
- 6.27 kW
- EER, full load (tested)
- 4.32
- COP, full load (tested)
- 4.82
- Rated AEER
- 4.38
- Rated ACOP
- 4.89
- Standby power (PIA)
- 50.0 W
- Compressor
- Variable speed, Inverter
- Refrigerant
- R410A
- Power supply
- Three phase
- Indoor sound power
- –
- Outdoor sound power
- 75.6 dB(A)
- Demand response (AS/NZS 4755)
- Yes (mode 1 on off, mode 2 50 percent, mode 3 75 percent)
- Country of manufacture
- Malaysia
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
Panasonic U-10MF3R7 zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | – | – | 2,598 | 2,804 |
| Coldresidential | residential | 4.0 | 3.0 | 1,279 | 8,836 |
| Mixedcommercial | commercial | – | – | 3,286 | 1,444 |
| Mixedresidential | residential | 4.0 | 4.0 | 1,996 | 3,203 |
| Hotcommercial | commercial | – | – | 7,303 | 362 |
| Hotresidential | residential | 4.5 | 4.5 | 5,555 | 541 |
Part-load test points (19 values)
- h__h2_ext_cap_power_rated
- 7640 W
- c__t1_half_cap_power_rated
- 1930 W
- c__t1_have_min_cap_results
- No
- h__h1_half_cap_power_rated
- 2280 W
- h__h1_have_min_cap_results
- No
- h__h3_have_ext_cap_results
- No
- h__h2_have_full_cap_results
- No
- h__h2_have_half_cap_results
- No
- h__h3_have_half_cap_results
- No
- h__h2_ext_cap_heat_cap_rated
- 27700 W
- h__h1_half_cap_heat_cap_rated
- 15800 W
- h__h2_is_capable_extended_load
- Yes
- c__low_temp_full_cap_power_rated
- 5694.22 W
- c__low_temp_half_cap_power_rated
- 1764.02 W
- c__low_temp_have_min_cap_results
- No
- c__t1_half_cap_cooling_cap_rated
- 14000 W
- c__low_temp_have_half_cap_results
- No
- c__low_temp_full_cap_cooling_cap_rated
- 30156 W
- c__low_temp_half_cap_cooling_cap_rated
- 15078 W
Australian GEMS registration details
- Registration number
- AAC7656
- GEMS registration id
- 155659
- Status
- approved, available (self-reported)
- Registration expires
- 30 July 2028
- Registered for sale in
- Australia, New Zealand
- Family
- –
- Regulatory standard
- [SEER Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
- Test standard
- AS/NZS 3823.1.4:2012
- MEPS
- 2019
- Product class
- Class 20
Source: Australian Government Energy Rating (GEMS) registration data, DCCEEW via data.gov.au (CC BY 3.0 AU). Dataset published 19 September 2026; last checked 20 September 2026. How the derived figures are calculated.