c/kWh
Energy rating (cooling)
1.5
Heating: 1.5
Annual electricity use
3,352 kWh
1,411 cooling + 1,941 heating
Estimated running cost
$1,073 / year
$89 / month Β· $10,726 over 10 years
Capacity
11.3 kW cooling
10.8 kW heating

Only 3 comparable registrations in this cohort, so no percentile is shown.

Across all 3,680 air conditioner registrations sold in Australia, it uses less than 31% (this compares very different sizes, so the cohort figure above is the useful one).

coolingheatingClick a zone to use it across the page.

Annual kWh is the government label figure for a residential user in the mixed zone (Richmond NSW climate: Sydney, Melbourne, Adelaide, Perth). Mixed climate zone shown by default (Sydney, Melbourne, Adelaide, Perth); switch to cold or hot. Cost = kWh Γ— 32c/kWh in AUD; change the price above to your tariff.

Temperzone OPA116RKTY running cost by climate zone

Climate zonekWh / yearPer year10 years
Cold zone 5,821$1,863$18,627
Mixed zone 3,352$1,073$10,726
Hot zone 4,498$1,439$14,394

At 32c/kWh. Formula: cost = annual kWh Γ— price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.

Air conditioners similar to the Temperzone OPA116RKTY

Technically comparable registrations: same configuration and type, capacity within 12%.

ModelStarsEst. cost / yrCompare
APAC P012AVR3SA-LTR11.7 kW heating11.4 kW cooling3,584 kWh/yr1$1,147
APAC P012AHR3SA11.7 kW heating11.4 kW cooling3,584 kWh/yr1$1,147

Compare OPA116RKTY with another model

Temperzone OPA116RKTY specifications

Type
Reverse cycle
Configuration
Packaged
Air distribution
Ducted
Indoor unit
–
Rated cooling capacity (35 Β°C)
11.33 kW
Cooling power input
3.38 kW
Rated heating capacity (7 Β°C)
10.81 kW
Heating power input
3.02 kW
EER, full load (tested)
3.35
COP, full load (tested)
3.58
Rated AEER
3.34
Rated ACOP
3.56
Standby power (PIA)
3.8 W
Compressor
Fixed speed
Refrigerant
R410A
Power supply
Three phase
Indoor sound power
–
Outdoor sound power
–
Demand response (AS/NZS 4755)
Yes (requires additional part)
Country of manufacture
Australia, New Zealand

Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.

Temperzone OPA116RKTY zoned energy rating figures

As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.

ZoneCooling starsHeating starsCooling kWhHeating kWh
Coldcommercial––2,1611,650
Coldresidential1.51.09314,890
Mixedcommercial––2,667895
Mixedresidential1.51.51,4111,941
Hotcommercial––5,773193
Hotresidential2.01.54,190308
Part-load test points (4 values)
h__h2_full_cap_power_rated
2901 W
h__h3_have_full_cap_results
No
h__h2_full_cap_heat_cap_rated
9444 W
c__low_temp_have_full_cap_results
No

Australian GEMS registration details

Registration number
AAC6801
GEMS registration id
147802
Status
approved, available (self-reported)
Registration expires
4 July 2027
Registered for sale in
Australia, Fiji, New Zealand
Family
–
Regulatory standard
[SEER Non Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
Test standard
AS/NZS 3823.1.2:2012
MEPS
2019
Product class
Class 6

Source: Australian Government Energy Rating (GEMS) registration data, DCCEEW via data.gov.au (CC BY 3.0 AU). Dataset published 19 September 2026; last checked 20 September 2026. How the derived figures are calculated.