New Zealand · costs in NZD
Reverse cycle fixed air conditioner
Kaden KM60 Heat Pump
Kaden KM60 is a 17.5 kW reverse cycle fixed heat pump registered for sale in New Zealand under the trans-Tasman E3 energy rating scheme (registration AAC8482).
- Energy rating (cooling)
- 3.5
- Heating: 2
- Annual electricity use
- 7,964 kWh
- 907 cooling + 7,057 heating
- Estimated running cost
- $2,628 / year
- $219 / month · $26,281 over 10 years
- Capacity
- 17.5 kW cooling
- 20 kW heating
Only 4 comparable registrations in this cohort, so no percentile is shown.
Across all 3,611 air conditioner registrations sold in Australia, it uses less than 19% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the cold zone (Canberra climate: Canberra, Hobart, Ballarat, alpine areas). All of New Zealand is the cold zone on the Zoned Energy Rating Label. Cost = kWh × 33c/kWh in NZD; change the price above to your tariff.
Kaden KM60 running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 7,964 | $2,628 | $26,281 |
| Mixed zone | 3,977 | $1,312 | $13,124 |
| Hot zone | 4,517 | $1,491 | $14,906 |
At 33c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.
Heat pumps that use less electricity
Same configuration and type, cooling capacity within 12% of 17.5 kW, at least 3% lower annual kWh in the cold zone.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Smart User SM4OU-D200MK20 kW heating18 kW cooling7,630 kWh/yr | 3 | $2,518 |
Heat pumps similar to the Kaden KM60
Technically comparable registrations: same configuration and type, capacity within 12%.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Spt AM180C-620.7 kW heating18 kW cooling8,044 kWh/yr | 3.5 | $2,655 | |
| Midea MULMI0618B20.5 kW heating18 kW cooling8,090 kWh/yr | 3.5 | $2,670 | |
| Smart User SM4OU-D200MK20 kW heating18 kW cooling7,630 kWh/yr | 3 | $2,518 | |
| Carrier 38QUM190D8S621.5 kW heating19 kW cooling8,459 kWh/yr | 4 | $2,791 | |
| Midea MULMI0619C21.5 kW heating19 kW cooling8,459 kWh/yr | 4 | $2,791 |
Compare KM60 with another model
Kaden KM60 specifications
- Type
- Reverse cycle
- Configuration
- Fixed
- Air distribution
- Non-ducted
- Indoor unit
- –
- Rated cooling capacity (35 °C)
- 17.50 kW
- Cooling power input
- 5.00 kW
- Rated heating capacity (7 °C)
- 20.00 kW
- Heating power input
- 5.10 kW
- EER, full load (tested)
- 3.63
- COP, full load (tested)
- 3.89
- Rated AEER
- 3.45
- Rated ACOP
- 3.87
- Standby power (PIA)
- 22.1 W
- Compressor
- Variable speed, Inverter
- Refrigerant
- R32
- Power supply
- Single phase
- Indoor sound power
- –
- Outdoor sound power
- 71 dB(A)
- Demand response (AS/NZS 4755)
- Yes
- Country of manufacture
- China
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
Kaden KM60 zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | – | – | 1,606 | 2,158 |
| Coldresidential | residential | 3.5 | 2.0 | 907 | 7,057 |
| Mixedcommercial | commercial | – | – | 2,161 | 1,092 |
| Mixedresidential | residential | 3.0 | 2.5 | 1,433 | 2,544 |
| Hotcommercial | commercial | – | – | 5,260 | 245 |
| Hotresidential | residential | 3.5 | 3.5 | 4,139 | 378 |
Part-load test points (23 values)
- c__t1_min_cap_power_rated
- 840 W
- h__h1_min_cap_power_rated
- 955 W
- h__h2_ext_cap_power_rated
- 6500 W
- c__t1_half_cap_power_rated
- 1690 W
- c__t1_have_min_cap_results
- Yes
- h__h1_half_cap_power_rated
- 1900 W
- h__h1_have_min_cap_results
- Yes
- h__h3_have_ext_cap_results
- No
- h__h2_have_full_cap_results
- No
- h__h2_have_half_cap_results
- No
- h__h3_have_full_cap_results
- No
- h__h3_have_half_cap_results
- No
- h__h1_min_cap_heat_cap_rated
- 5200 W
- h__h2_ext_cap_heat_cap_rated
- 17500 W
- h__h1_half_cap_heat_cap_rated
- 9800 W
- h__h2_is_capable_extended_load
- Yes
- c__low_temp_min_cap_power_rated
- 680 W
- c__t1_min_cap_cooling_cap_rated
- 4900 W
- c__low_temp_half_cap_power_rated
- 1330 W
- c__t1_half_cap_cooling_cap_rated
- 9000 W
- c__low_temp_have_half_cap_results
- Yes
- c__low_temp_min_cap_cooling_cap_rated
- 5400 W
- c__low_temp_half_cap_cooling_cap_rated
- 9000 W
New Zealand E3 registration details
- Registration number
- AAC8482
- GEMS registration id
- 164637
- Status
- approved, available (self-reported)
- Registration expires
- 6 October 2029
- Registered for sale in
- Australia, New Zealand
- Family
- –
- Regulatory standard
- [SEER Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
- Test standard
- AS/NZS 3823.1.4:2012
- MEPS
- 2019
- Product class
- Class 20
Source: E3 programme registration data (EECA, New Zealand) (trans-Tasman E3 registration data published by DCCEEW on data.gov.au, CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. Manufacturer: midea.com/global. How the derived figures are calculated.