New Zealand · costs in NZD
Reverse cycle multi-split / vrf air conditioner
Mitsubishi Electric PUMY-P200YKM3-A Heat Pump
Mitsubishi Electric PUMY-P200YKM3-A is a 22.4 kW reverse cycle multi-split / vrf heat pump registered for sale in New Zealand under the trans-Tasman E3 energy rating scheme (registration AAC9838).
- Energy rating (cooling)
- 3
- Heating: 2
- Annual electricity use
- 10,585 kWh
- 1,299 cooling + 9,286 heating
- Estimated running cost
- $3,493 / year
- $291 / month · $34,931 over 10 years
- Capacity
- 22.4 kW cooling
- 25 kW heating
5% more electricity than the median of 29 comparable 20 kW reverse cycle multi-split / vrf registrations (10,056 kWh a year) in the cold zone. Uses less than 41% of them.
Across all 3,611 air conditioner registrations sold in Australia, it uses less than 13% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the cold zone (Canberra climate: Canberra, Hobart, Ballarat, alpine areas). All of New Zealand is the cold zone on the Zoned Energy Rating Label. Cost = kWh × 33c/kWh in NZD; change the price above to your tariff.
Mitsubishi Electric PUMY-P200YKM3-A running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 10,585 | $3,493 | $34,931 |
| Mixed zone | 5,217 | $1,722 | $17,216 |
| Hot zone | 6,314 | $2,084 | $20,836 |
At 33c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.
Heat pumps that use less electricity
Same configuration and type, cooling capacity within 12% of 22.4 kW, at least 3% lower annual kWh in the cold zone.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Daikin RSUYA7AYM22.4 kW heating20 kW cooling7,360 kWh/yr | 3 | $2,429 | |
| Panasonic U-8MF3R725 kW heating22.4 kW cooling8,140 kWh/yr | 4 | $2,686 | |
| Daikin RSUYA8AYM25 kW heating22.4 kW cooling8,492 kWh/yr | 3 | $2,802 | |
| Mitsubishi Heavy Industries FDC224KXZPE122.4 kW heating22.4 kW cooling8,641 kWh/yr | 2.5 | $2,852 | |
| Mitsubishi Heavy Industries FDC224KXZME122.4 kW heating22.4 kW cooling8,706 kWh/yr | 2.5 | $2,873 |
Heat pumps similar to the Mitsubishi Electric PUMY-P200YKM3-A
Technically comparable registrations: same configuration and type, capacity within 12%.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Hitachi RAS-080HNCELW25 kW heating22.4 kW cooling9,846 kWh/yr | 2.5 | $3,249 | |
| Panasonic U-8MF3R725 kW heating22.4 kW cooling8,140 kWh/yr | 4 | $2,686 | |
| Panasonic U-8LZ2E825 kW heating22.4 kW cooling9,522 kWh/yr | 2.5 | $3,142 | |
| Mitsubishi Heavy Industries FDC224KXZME122.4 kW heating22.4 kW cooling8,706 kWh/yr | 2.5 | $2,873 | |
| Toshiba MMY-MUP08S1HT8P-A25 kW heating22.4 kW cooling9,472 kWh/yr | 3 | $3,126 | |
| Daikin RSUYA8AYM25 kW heating22.4 kW cooling8,492 kWh/yr | 3 | $2,802 | |
| Daikin REYA8AYM25 kW heating22.4 kW cooling9,254 kWh/yr | 3 | $3,054 | |
| Mitsubishi Heavy Industries FDC224KXZPE122.4 kW heating22.4 kW cooling8,641 kWh/yr | 2.5 | $2,852 |
Compare PUMY-P200YKM3-A with another model
Mitsubishi Electric PUMY-P200YKM3-A specifications
- Type
- Reverse cycle
- Configuration
- Multi-split / VRF
- Air distribution
- Ducted or non-ducted
- Indoor unit
- –
- Rated cooling capacity (35 °C)
- 22.40 kW
- Cooling power input
- 5.87 kW
- Rated heating capacity (7 °C)
- 25.00 kW
- Heating power input
- 6.02 kW
- EER, full load (tested)
- 3.92
- COP, full load (tested)
- 4.40
- Rated AEER
- 3.77
- Rated ACOP
- 4.10
- Standby power (PIA)
- 22.1 W
- Compressor
- Variable speed, Inverter
- Refrigerant
- R410A
- Power supply
- Three phase
- Indoor sound power
- –
- Outdoor sound power
- 70 dB(A)
- Demand response (AS/NZS 4755)
- No
- Country of manufacture
- Thailand
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
Mitsubishi Electric PUMY-P200YKM3-A zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | – | – | 2,839 | 2,893 |
| Coldresidential | residential | 3.0 | 2.0 | 1,299 | 9,286 |
| Mixedcommercial | commercial | – | – | 3,560 | 1,378 |
| Mixedresidential | residential | 3.0 | 2.5 | 2,018 | 3,199 |
| Hotcommercial | commercial | – | – | 7,865 | 297 |
| Hotresidential | residential | 3.0 | 3.5 | 5,856 | 458 |
Part-load test points (16 values)
- h__h2_ext_cap_power_rated
- 7130 W
- c__t1_half_cap_power_rated
- 2270 W
- c__t1_have_min_cap_results
- No
- h__h1_half_cap_power_rated
- 2200 W
- h__h1_have_min_cap_results
- No
- h__h3_have_ext_cap_results
- No
- h__h2_have_full_cap_results
- No
- h__h2_have_half_cap_results
- No
- h__h3_have_full_cap_results
- No
- h__h3_have_half_cap_results
- No
- h__h2_ext_cap_heat_cap_rated
- 19000 W
- h__h1_half_cap_heat_cap_rated
- 12500 W
- h__h2_is_capable_extended_load
- Yes
- c__low_temp_have_min_cap_results
- No
- c__t1_half_cap_cooling_cap_rated
- 11200 W
- c__low_temp_have_half_cap_results
- No
Other model numbers on registration AAC9838
Registered together and sharing the same test results. Usually variants of the same unit.
New Zealand E3 registration details
- Registration number
- AAC9838
- GEMS registration id
- 176543
- Status
- approved, available (self-reported)
- Registration expires
- 9 February 2031
- Registered for sale in
- Australia, New Zealand
- Family
- PUMY-P200YKM3-A series
- Regulatory standard
- [SEER Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
- Test standard
- AS/NZS 3823.1.4:2012
- MEPS
- 2019
- Product class
- Class 20
Source: E3 programme registration data (EECA, New Zealand) (trans-Tasman E3 registration data published by DCCEEW on data.gov.au, CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. Manufacturer: MitsubishiElectric.com.au. How the derived figures are calculated.