New Zealand · costs in NZD
Reverse cycle packaged air conditioner
Temperzone OPA 2110RLTM1FDPQ Heat Pump
Temperzone OPA 2110RLTM1FDPQ is a 193.8 kW reverse cycle ducted packaged heat pump registered for sale in New Zealand under the trans-Tasman E3 energy rating scheme (registration AAC7757).
- Energy rating (cooling)
- 1.5
- Heating: 1
- Annual electricity use
- 108,324 kWh
- 16,227 cooling + 92,097 heating
- Estimated running cost
- $35,747 / year
- $2,979 / month · $357,469 over 10 years
- Capacity
- 193.8 kW cooling
- 194.7 kW heating
161% more electricity than the median of 53 comparable 80 kW and above reverse cycle ducted packaged registrations (41,538 kWh a year) in the cold zone. Uses less than 4% of them.
Across all 3,611 air conditioner registrations sold in Australia, it uses less than 0% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the cold zone (Canberra climate: Canberra, Hobart, Ballarat, alpine areas). All of New Zealand is the cold zone on the Zoned Energy Rating Label. Cost = kWh × 33c/kWh in NZD; change the price above to your tariff.
Temperzone OPA 2110RLTM1FDPQ running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 108,324 | $35,747 | $357,469 |
| Mixed zone | 61,463 | $20,283 | $202,828 |
| Hot zone | 79,129 | $26,113 | $261,126 |
At 33c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.
Heat pumps that use less electricity
Same configuration and type, cooling capacity within 12% of 193.8 kW, at least 3% lower annual kWh in the cold zone.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| APAC P170AHR3SA-CBR164.5 kW heating173.9 kW cooling15,426 kWh/yr | 1 | $5,091 | |
| APAC P170AHR3SA-CTR164.5 kW heating173.9 kW cooling15,426 kWh/yr | 1 | $5,091 | |
| Temperzone OPA2100RKTMDF-P186.7 kW heating178 kW cooling15,908 kWh/yr | 1.5 | $5,250 | |
| Temperzone FPA1700RKTMGQ-P182.1 kW heating182.9 kW cooling16,967 kWh/yr | 1.5 | $5,599 | |
| Actron Air PKV2000T180.4 kW heating187.5 kW cooling17,310 kWh/yr | 1 | $5,712 |
Heat pumps similar to the Temperzone OPA 2110RLTM1FDPQ
Technically comparable registrations: same configuration and type, capacity within 12%.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| AIRSTAGE URT/EC/WP/MS/172/SK208 kW heating195 kW cooling104,196 kWh/yr | 1.5 | $34,385 | |
| AIRSTAGE URT-EC-WP-MS-172-SK208 kW heating195 kW cooling104,196 kWh/yr | 1.5 | $34,385 | |
| Actron Air PKV2000T180.4 kW heating187.5 kW cooling17,310 kWh/yr | 1 | $5,712 | |
| Carrier 50FC-180190 kW heating181 kW cooling123,455 kWh/yr | 1.5 | $40,740 | |
| APAC P200AHR3SA-CBR194.4 kW heating209 kW cooling17,760 kWh/yr | 1.5 | $5,861 | |
| APAC P200AHR3SA-194.4 kW heating209 kW cooling17,760 kWh/yr | 1.5 | $5,861 |
Other Temperzone models of similar capacity
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Temperzone OPA2000RKTMG-P186.1 kW heating183.6 kW cooling17,006 kWh/yr | 1.5 | $5,612 | |
| Temperzone FPA1700RKTMGQ-P182.1 kW heating182.9 kW cooling16,967 kWh/yr | 1.5 | $5,599 |
Compare OPA 2110RLTM1FDPQ with another model
Temperzone OPA 2110RLTM1FDPQ specifications
- Type
- Reverse cycle
- Configuration
- Packaged
- Air distribution
- Ducted
- Indoor unit
- –
- Rated cooling capacity (35 °C)
- 193.81 kW
- Cooling power input
- 64.53 kW
- Rated heating capacity (7 °C)
- 194.71 kW
- Heating power input
- 55.23 kW
- EER, full load (tested)
- 3.00
- COP, full load (tested)
- 3.53
- Rated AEER
- 3.00
- Rated ACOP
- 3.52
- Standby power (PIA)
- 41.5 W
- Compressor
- Variable speed, Inverter
- Refrigerant
- R32
- Power supply
- Three phase
- Indoor sound power
- –
- Outdoor sound power
- –
- Demand response (AS/NZS 4755)
- No
- Country of manufacture
- New Zealand
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
Temperzone OPA 2110RLTM1FDPQ zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | – | – | 33,392 | 31,593 |
| Coldresidential | residential | 1.5 | 1.0 | 16,227 | 92,097 |
| Mixedcommercial | commercial | – | – | 43,577 | 17,341 |
| Mixedresidential | residential | 1.5 | 1.0 | 24,813 | 36,650 |
| Hotcommercial | commercial | – | – | 96,724 | 3,703 |
| Hotresidential | residential | 1.5 | 1.0 | 73,292 | 5,837 |
Part-load test points (18 values)
- h__h2_ext_cap_power_rated
- 60675 W
- c__t1_half_cap_power_rated
- 37498 W
- c__t1_have_min_cap_results
- No
- h__h1_half_cap_power_rated
- 32855 W
- h__h1_have_min_cap_results
- No
- h__h3_have_ext_cap_results
- No
- h__h2_have_full_cap_results
- No
- h__h2_have_half_cap_results
- No
- h__h3_have_full_cap_results
- No
- h__h3_have_half_cap_results
- No
- h__h2_ext_cap_heat_cap_rated
- 169725 W
- h__h1_half_cap_heat_cap_rated
- 100778 W
- h__h2_is_capable_extended_load
- Yes
- c__low_temp_half_cap_power_rated
- 30170 W
- c__low_temp_have_min_cap_results
- No
- c__t1_half_cap_cooling_cap_rated
- 98772 W
- c__low_temp_have_half_cap_results
- Yes
- c__low_temp_half_cap_cooling_cap_rated
- 103574 W
New Zealand E3 registration details
- Registration number
- AAC7757
- GEMS registration id
- 156345
- Status
- approved, available (self-reported)
- Registration expires
- 3 September 2028
- Registered for sale in
- Australia, Fiji, New Zealand
- Family
- –
- Regulatory standard
- [SEER Non Multi-Split >65kW] GEMS (Air Conditioners above 65kW) Determination 2022
- Test standard
- AS/NZS 3823.1.2:2012
- MEPS
- 2020
- Product class
- Class 24
Source: E3 programme registration data (EECA, New Zealand) (trans-Tasman E3 registration data published by DCCEEW on data.gov.au, CC BY 3.0 AU). Dataset published 19 September 2026; last checked 20 September 2026. How the derived figures are calculated.