c/kWh
Energy rating (cooling)
3
Heating: 2.5
Annual electricity use
3,462 kWh
1,234 cooling + 2,228 heating
Estimated running cost
$1,108 / year
$92 / month Β· $11,078 over 10 years
Capacity
14 kW cooling
16 kW heating

1% more electricity than the median of 19 comparable 14 kW reverse cycle multi-split / vrf registrations (3,425 kWh a year) in the mixed zone. Uses less than 32% of them.

Across all 3,680 air conditioner registrations sold in Australia, it uses less than 30% (this compares very different sizes, so the cohort figure above is the useful one).

coolingheatingClick a zone to use it across the page.

Annual kWh is the government label figure for a residential user in the mixed zone (Richmond NSW climate: Sydney, Melbourne, Adelaide, Perth). Mixed climate zone shown by default (Sydney, Melbourne, Adelaide, Perth); switch to cold or hot. Cost = kWh Γ— 32c/kWh in AUD; change the price above to your tariff.

Mitsubishi Electric PUMY-P125YKMD7-BS running cost by climate zone

Climate zonekWh / yearPer year10 years
Cold zone 7,004$2,241$22,413
Mixed zone 3,462$1,108$11,078
Hot zone 3,818$1,222$12,218

At 32c/kWh. Formula: cost = annual kWh Γ— price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.

Air conditioners that use less electricity

Same configuration and type, cooling capacity within 12% of 14 kW, at least 3% lower annual kWh in the mixed zone.

ModelStarsEst. cost / yrCompare
Daikin RSUYA5AVM16 kW heating14 kW cooling2,817 kWh/yr3$901
Panasonic U-5LZ2E516 kW heating14 kW cooling2,845 kWh/yr3$910
Panasonic U-5LZ2E816 kW heating14 kW cooling2,845 kWh/yr3$910
Mitsubishi Electric PUMY-SP112VKMD3-A Series14 kW heating12.5 kW cooling2,935 kWh/yr2.5$939
Mitsubishi Electric PUMY-SP112VKMD3-A-BS14 kW heating12.5 kW cooling2,935 kWh/yr2.5$939

Air conditioners similar to the Mitsubishi Electric PUMY-P125YKMD7-BS

Technically comparable registrations: same configuration and type, capacity within 12%.

ModelStarsEst. cost / yrCompare
Daikin RSUYA5AVM16 kW heating14 kW cooling2,817 kWh/yr3$901
Panasonic U-5LZ2E516 kW heating14 kW cooling2,845 kWh/yr3$910
Mitsubishi Heavy Industries FDC140KXZES114 kW heating14 kW cooling3,503 kWh/yr2$1,121
Braemar MCMX140D108B16 kW heating14 kW cooling4,533 kWh/yr1.5$1,451
Panasonic U-5LZ2E816 kW heating14 kW cooling2,845 kWh/yr3$910
Mitsubishi Heavy Industries FDC140KXZEN1-W14 kW heating14 kW cooling3,539 kWh/yr2$1,132

Other Mitsubishi Electric models of similar capacity

ModelStarsEst. cost / yrCompare
Mitsubishi Electric PUMY-SP125YKMD3-A Series16 kW heating14 kW cooling3,361 kWh/yr2.5$1,076
Mitsubishi Electric PUMY-SP125YKMD3-A-BS16 kW heating14 kW cooling3,361 kWh/yr2.5$1,076

Compare PUMY-P125YKMD7-BS with another model

Mitsubishi Electric PUMY-P125YKMD7-BS specifications

Type
Reverse cycle
Configuration
Multi-split / VRF
Air distribution
Ducted or non-ducted
Indoor unit
–
Rated cooling capacity (35 Β°C)
14.00 kW
Cooling power input
3.65 kW
Rated heating capacity (7 Β°C)
16.00 kW
Heating power input
3.88 kW
EER, full load (tested)
3.67
COP, full load (tested)
4.21
Rated AEER
3.56
Rated ACOP
4.04
Standby power (PIA)
23.0 W
Compressor
Variable speed, Inverter
Refrigerant
R410A
Power supply
Three phase
Indoor sound power
–
Outdoor sound power
62.4 dB(A)
Demand response (AS/NZS 4755)
Yes
Country of manufacture
Japan, Thailand

Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.

Mitsubishi Electric PUMY-P125YKMD7-BS zoned energy rating figures

As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.

ZoneCooling starsHeating starsCooling kWhHeating kWh
Coldcommercial––1,4531,910
Coldresidential3.01.57926,212
Mixedcommercial––1,938981
Mixedresidential3.02.51,2342,228
Hotcommercial––4,415226
Hotresidential3.53.03,473345
Part-load test points (20 values)
h__h1_min_cap_power_rated
900 W
h__h2_ext_cap_power_rated
4740 W
c__t1_half_cap_power_rated
1500 W
c__t1_have_min_cap_results
No
h__h1_half_cap_power_rated
1720 W
h__h1_have_min_cap_results
Yes
h__h3_have_ext_cap_results
No
h__h2_have_full_cap_results
No
h__h2_have_half_cap_results
No
h__h3_have_full_cap_results
No
h__h3_have_half_cap_results
No
h__h1_min_cap_heat_cap_rated
4330 W
h__h2_ext_cap_heat_cap_rated
12520 W
h__h1_half_cap_heat_cap_rated
8000 W
h__h2_is_capable_extended_load
Yes
c__low_temp_half_cap_power_rated
1200 W
c__low_temp_have_min_cap_results
No
c__t1_half_cap_cooling_cap_rated
7000 W
c__low_temp_have_half_cap_results
Yes
c__low_temp_half_cap_cooling_cap_rated
7540 W

Other model numbers on registration AAC8660

Registered together and sharing the same test results. Usually variants of the same unit.

Australian GEMS registration details

Registration number
AAC8660
GEMS registration id
167052
Status
approved, available (self-reported)
Registration expires
18 March 2030
Registered for sale in
Australia, New Zealand
Family
PUMY-P125YKMD7 Series
Regulatory standard
[SEER Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
Test standard
AS/NZS 3823.1.4:2012
MEPS
2019
Product class
Class 20

Source: Australian Government Energy Rating (GEMS) registration data, DCCEEW via data.gov.au (CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. Manufacturer: MitsubishiElectric.com.au. How the derived figures are calculated.