Name: Mitsubishi Electric PUMY-SP80YKMD3-A
Brand: Mitsubishi Electric
SKU: AAC9841

Climate zone

Electricity pricec/kWh

Energy rating (cooling): 2; Heating: 3
Annual electricity use: 2,134 kWh; 940 cooling + 1,194 heating
Estimated running cost: $683 / year; $57 / month · $6,829 over 10 years
Capacity: 9 kW cooling; 10 kW heating

About the same electricity as the median of 11 comparable 10 kW reverse cycle multi-split / vrf registrations (2,136 kWh a year) in the mixed zone. Uses less than 64% of them.

Across all 3,680 air conditioner registrations sold in Australia, it uses less than 49% (this compares very different sizes, so the cohort figure above is the useful one).

coolingheatingClick a zone to use it across the page.

Annual kWh is the government label figure for a residential user in the mixed zone (Richmond NSW climate: Sydney, Melbourne, Adelaide, Perth). Mixed climate zone shown by default (Sydney, Melbourne, Adelaide, Perth); switch to cold or hot. Cost = kWh × 32c/kWh in AUD; change the price above to your tariff.

Mitsubishi Electric PUMY-SP80YKMD3-A running cost by climate zone

Climate zone	kWh / year	Per month	Per year	5 years	10 years
Cold zone (Canberra, Hobart, Ballarat, alpine areas)	3,667	$98	$1,173	$5,867	$11,734
Mixed zone (Sydney, Melbourne, Adelaide, Perth)	2,134	$57	$683	$3,414	$6,829
Hot zone (Brisbane, Darwin, Cairns, Townsville)	2,829	$75	$905	$4,526	$9,053

At 32c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.

Air conditioners that use less electricity

Same configuration and type, cooling capacity within 12% of 9 kW, at least 3% lower annual kWh in the mixed zone.

Model	Cooling	Heating	Stars	kWh / yr	Est. cost / yr	Uses less than	Compare
Rinnai MON4H09B9.6 kW heating9.2 kW cooling1,822 kWh/yr	9.2 kW	9.6 kW	4	1,822	$583	91% of similar
Pioneer International TVN-090A110 kW heating9 kW cooling2,061 kWh/yr	9 kW	10 kW	3	2,061	$660	82% of similar

Air conditioners similar to the Mitsubishi Electric PUMY-SP80YKMD3-A

Technically comparable registrations: same configuration and type, capacity within 12%.

Model	Cooling	Heating	Stars	kWh / yr	Est. cost / yr	Uses less than
Mitsubishi Heavy Industries FDC90KXZEN1-W9 kW heating9 kW cooling2,164 kWh/yr	9 kW	9 kW	2.5	2,164	$692	27% of similar
Pioneer International TVN-090A110 kW heating9 kW cooling2,061 kWh/yr	9 kW	10 kW	3	2,061	$660	82% of similar
Rinnai MON4H09B9.6 kW heating9.2 kW cooling1,822 kWh/yr	9.2 kW	9.6 kW	4	1,822	$583	91% of similar
Braemar MCMX100D105B11 kW heating10 kW cooling3,627 kWh/yr	10 kW	11 kW	1	3,627	$1,161	0% of similar
Braemar MCMX080D104B9 kW heating8 kW cooling2,716 kWh/yr	8 kW	9 kW	1	2,716	$869	0% of similar

Other Mitsubishi Electric models of similar capacity

Model	Cooling	Heating	Stars	kWh / yr	Est. cost / yr	Uses less than	Compare
Mitsubishi Electric PUMY-SP80VKMD3-A10 kW heating9 kW cooling2,134 kWh/yr	9 kW	10 kW	2	2,134	$683	64% of similar
Mitsubishi Electric PUMY-SP80VKMD3-A-BS10 kW heating9 kW cooling2,134 kWh/yr	9 kW	10 kW	2	2,134	$683	64% of similar

Compare PUMY-SP80YKMD3-A with another model

Mitsubishi Electric PUMY-SP80YKMD3-A specifications

Type: Reverse cycle
Configuration: Multi-split / VRF
Air distribution: Ducted or non-ducted
Indoor unit: –
Rated cooling capacity (35 °C): 9.00 kW
Cooling power input: 1.99 kW
Rated heating capacity (7 °C): 10.00 kW
Heating power input: 1.97 kW
EER, full load (tested): 5.38
COP, full load (tested): 5.46
Rated AEER: 4.34
Rated ACOP: 4.87
Standby power (PIA): 24.2 W
Compressor: Variable speed, Inverter
Refrigerant: R410A
Power supply: Three phase
Indoor sound power: –
Outdoor sound power: 65.5 dB(A)
Demand response (AS/NZS 4755): Yes (mode 1 on off, mode 2 50 percent, mode 3 75 percent)
Country of manufacture: Thailand

Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.

Mitsubishi Electric PUMY-SP80YKMD3-A zoned energy rating figures

As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.

Zone	Profile	Cooling stars	Heating stars	Cooling kWh	Heating kWh	TCSPF	HSPF
Coldcommercial	commercial	–	–	1,398	1,027	4.55	4.51
Coldresidential	residential	2.0	2.5	636	3,031	3.67	4.39
Mixedcommercial	commercial	–	–	1,707	566	4.41	4.86
Mixedresidential	residential	2.0	3.0	940	1,194	3.79	4.81
Hotcommercial	commercial	–	–	3,545	154	4.70	5.01
Hotresidential	residential	2.5	3.5	2,602	227	4.43	5.03

Part-load test points (16 values)

h__h2_ext_cap_power_rated: 3450 W
c__t1_half_cap_power_rated: 1160 W
c__t1_have_min_cap_results: No
h__h1_half_cap_power_rated: 920 W
h__h1_have_min_cap_results: No
h__h3_have_ext_cap_results: No
h__h2_have_full_cap_results: No
h__h2_have_half_cap_results: No
h__h3_have_full_cap_results: No
h__h3_have_half_cap_results: No
h__h2_ext_cap_heat_cap_rated: 10520 W
h__h1_half_cap_heat_cap_rated: 5000 W
h__h2_is_capable_extended_load: Yes
c__low_temp_have_min_cap_results: No
c__t1_half_cap_cooling_cap_rated: 4500 W
c__low_temp_have_half_cap_results: No

Other model numbers on registration AAC9841

Registered together and sharing the same test results. Usually variants of the same unit.

Australian GEMS registration details

Registration number: AAC9841
GEMS registration id: 176602
Status: approved, available (self-reported)
Registration expires: 10 February 2031
Registered for sale in: Australia, New Zealand
Family: PUMY-SP80YKMD3-A Series
Regulatory standard: [SEER Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
Test standard: AS/NZS 3823.1.4:2012
MEPS: 2019
Product class: Class 19

Source: Australian Government Energy Rating (GEMS) registration data, DCCEEW via data.gov.au (CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. Manufacturer: MitsubishiElectric.com.au. How the derived figures are calculated.