New Zealand · costs in NZD
Reverse cycle split system air conditioner
Kaden KDI-7.0 Heat Pump
Kaden KDI-7.0 is a 7.3 kW reverse cycle ducted split system heat pump registered for sale in New Zealand under the trans-Tasman E3 energy rating scheme (registration AAC9242).
- Energy rating (cooling)
- 4
- Heating: 2.5
- Annual electricity use
- 2,773 kWh
- 341 cooling + 2,432 heating
- Estimated running cost
- $915 / year
- $76 / month · $9,151 over 10 years
- Capacity
- 7.3 kW cooling
- 7.5 kW heating
15% less electricity than the median of 80 comparable 7 kW reverse cycle ducted split system registrations (3,279 kWh a year) in the cold zone. Uses less than 81% of them.
Across all 3,611 air conditioner registrations sold in Australia, it uses less than 65% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the cold zone (Canberra climate: Canberra, Hobart, Ballarat, alpine areas). All of New Zealand is the cold zone on the Zoned Energy Rating Label. Cost = kWh × 33c/kWh in NZD; change the price above to your tariff.
Kaden KDI-7.0 running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 2,773 | $915 | $9,151 |
| Mixed zone | 1,464 | $483 | $4,831 |
| Hot zone | 1,695 | $559 | $5,594 |
At 33c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.
Heat pumps that use less electricity
Same configuration and type, cooling capacity within 12% of 7.3 kW, at least 3% lower annual kWh in the cold zone.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Panasonic U-71PZ4R5 / S-6071PF3E6.8 kW heating6.8 kW cooling2,674 kWh/yr | 3 | $882 |
Heat pumps similar to the Kaden KDI-7.0
Technically comparable registrations: same configuration and type, capacity within 12%.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Aurora AU-BS24HR-2A-O / AU-LCF24-2A-I7.5 kW heating7.3 kW cooling2,720 kWh/yr | 3.5 | $898 | |
| Rinnai DONSR07B1/DINLR07B17.5 kW heating7.3 kW cooling2,720 kWh/yr | 3.5 | $898 | |
| Midea UCMI70OC/DUCMI70IC7.5 kW heating7.3 kW cooling2,771 kWh/yr | 4 | $914 | |
| Midea UCMI70OB/DUCMI70IB7.4 kW heating7.3 kW cooling2,828 kWh/yr | 4 | $933 | |
| Actron Air LRC-071CS / LRE-071CS7.7 kW heating7.3 kW cooling2,793 kWh/yr | 3.5 | $922 | |
| Rinnai DONSR07B1/DINLR07B17.5 kW heating7.3 kW cooling2,756 kWh/yr | 3 | $909 | |
| Carrier 38QSP070N8/42QSP070N87.5 kW heating7.3 kW cooling2,771 kWh/yr | 4 | $914 | |
| Actron Air LRC-071DS / LRE-071DS7.5 kW heating7.3 kW cooling2,771 kWh/yr | 4 | $914 |
Compare KDI-7.0 with another model
Kaden KDI-7.0 specifications
- Type
- Reverse cycle
- Configuration
- Split system
- Air distribution
- Ducted
- Indoor unit
- –
- Rated cooling capacity (35 °C)
- 7.30 kW
- Cooling power input
- 2.14 kW
- Rated heating capacity (7 °C)
- 7.50 kW
- Heating power input
- 1.84 kW
- EER, full load (tested)
- 3.37
- COP, full load (tested)
- 4.00
- Rated AEER
- 3.39
- Rated ACOP
- 4.04
- Standby power (PIA)
- 4.2 W
- Compressor
- Variable speed, Inverter
- Refrigerant
- R32
- Power supply
- Single phase
- Indoor sound power
- –
- Outdoor sound power
- –
- Demand response (AS/NZS 4755)
- Yes
- Country of manufacture
- China
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
Kaden KDI-7.0 zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | – | – | 380 | 763 |
| Coldresidential | residential | 4.0 | 2.5 | 341 | 2,432 |
| Mixedcommercial | commercial | – | – | 657 | 399 |
| Mixedresidential | residential | 4.0 | 3.0 | 548 | 916 |
| Hotcommercial | commercial | – | – | 1,678 | 85 |
| Hotresidential | residential | 4.5 | 3.5 | 1,563 | 132 |
Part-load test points (23 values)
- c__t1_min_cap_power_rated
- 410 W
- h__h1_min_cap_power_rated
- 431 W
- h__h2_ext_cap_power_rated
- 2740 W
- c__t1_half_cap_power_rated
- 935 W
- c__t1_have_min_cap_results
- Yes
- h__h1_half_cap_power_rated
- 743 W
- h__h1_have_min_cap_results
- Yes
- h__h3_have_ext_cap_results
- No
- h__h2_have_full_cap_results
- No
- h__h2_have_half_cap_results
- No
- h__h3_have_full_cap_results
- No
- h__h3_have_half_cap_results
- No
- h__h1_min_cap_heat_cap_rated
- 2325 W
- h__h2_ext_cap_heat_cap_rated
- 7840 W
- h__h1_half_cap_heat_cap_rated
- 3837 W
- h__h2_is_capable_extended_load
- Yes
- c__low_temp_min_cap_power_rated
- 265 W
- c__t1_min_cap_cooling_cap_rated
- 850 W
- c__low_temp_half_cap_power_rated
- 556 W
- c__t1_half_cap_cooling_cap_rated
- 3500 W
- c__low_temp_have_half_cap_results
- Yes
- c__low_temp_min_cap_cooling_cap_rated
- 1900 W
- c__low_temp_half_cap_cooling_cap_rated
- 3650 W
New Zealand E3 registration details
- Registration number
- AAC9242
- GEMS registration id
- 171573
- Status
- approved, available (self-reported)
- Registration expires
- 19 August 2030
- Registered for sale in
- Australia, New Zealand
- Family
- –
- Regulatory standard
- [SEER Non Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
- Test standard
- AS/NZS 3823.1.2:2012
- MEPS
- 2019
- Product class
- Class 10
Source: E3 programme registration data (EECA, New Zealand) (trans-Tasman E3 registration data published by DCCEEW on data.gov.au, CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. Manufacturer: midea.com/global. How the derived figures are calculated.