New Zealand · costs in NZD
Reverse cycle multi-split / vrf air conditioner
Mitsubishi Electric PUMY-SP80YKMD2-A Heat Pump
Mitsubishi Electric PUMY-SP80YKMD2-A is a 9 kW reverse cycle ducted multi-split / vrf heat pump registered for sale in New Zealand under the trans-Tasman E3 energy rating scheme (registration AAC7012).
- Energy rating (cooling)
- 2
- Heating: 1.5
- Annual electricity use
- 4,656 kWh
- 675 cooling + 3,981 heating
- Estimated running cost
- $1,536 / year
- $128 / month · $15,365 over 10 years
- Capacity
- 9 kW cooling
- 10 kW heating
Only 3 comparable registrations in this cohort, so no percentile is shown.
Across all 3,611 air conditioner registrations sold in Australia, it uses less than 42% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the cold zone (Canberra climate: Canberra, Hobart, Ballarat, alpine areas). All of New Zealand is the cold zone on the Zoned Energy Rating Label. Cost = kWh × 33c/kWh in NZD; change the price above to your tariff.
Mitsubishi Electric PUMY-SP80YKMD2-A running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 4,656 | $1,536 | $15,365 |
| Mixed zone | 2,619 | $864 | $8,643 |
| Hot zone | 3,230 | $1,066 | $10,659 |
At 33c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.
Heat pumps similar to the Mitsubishi Electric PUMY-SP80YKMD2-A
Technically comparable registrations: same configuration and type, capacity within 12%.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Gree GMV-80WL/A-T(A)9 kW heating8 kW cooling4,764 kWh/yr | 1 | $1,572 | |
| Gree GMV-100WL/A-T(A)11 kW heating10 kW cooling6,677 kWh/yr | 1 | $2,203 |
Other Mitsubishi Electric models of similar capacity
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Mitsubishi Electric PUMY-SP80VKMD2-A-BS10 kW heating9 kW cooling4,677 kWh/yr | 2 | $1,543 | |
| Mitsubishi Electric PUMY-SP80VKMD2-A10 kW heating9 kW cooling4,677 kWh/yr | 2 | $1,543 |
Compare PUMY-SP80YKMD2-A with another model
Mitsubishi Electric PUMY-SP80YKMD2-A specifications
- Type
- Reverse cycle
- Configuration
- Multi-split / VRF
- Air distribution
- Ducted
- Indoor unit
- –
- Rated cooling capacity (35 °C)
- 9.00 kW
- Cooling power input
- 2.52 kW
- Rated heating capacity (7 °C)
- 10.00 kW
- Heating power input
- 2.63 kW
- EER, full load (tested)
- 4.20
- COP, full load (tested)
- 4.16
- Rated AEER
- 3.52
- Rated ACOP
- 3.75
- Standby power (PIA)
- 11.2 W
- Compressor
- Variable speed, Inverter
- Refrigerant
- R410A
- Power supply
- Three phase
- Indoor sound power
- –
- Outdoor sound power
- 65.4 dB(A)
- Demand response (AS/NZS 4755)
- Yes (mode 1 on off, mode 2 50 percent, mode 3 75 percent)
- Country of manufacture
- Thailand
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
Mitsubishi Electric PUMY-SP80YKMD2-A zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | – | – | 1,528 | 1,352 |
| Coldresidential | residential | 2.0 | 1.5 | 675 | 3,981 |
| Mixedcommercial | commercial | – | – | 1,888 | 747 |
| Mixedresidential | residential | 2.0 | 1.5 | 1,024 | 1,595 |
| Hotcommercial | commercial | – | – | 4,045 | 172 |
| Hotresidential | residential | 2.0 | 2.0 | 2,965 | 265 |
Part-load test points (20 values)
- h__h2_ext_cap_power_rated
- 3800 W
- c__t1_half_cap_power_rated
- 1280 W
- c__t1_have_min_cap_results
- No
- h__h1_half_cap_power_rated
- 1310 W
- h__h1_have_min_cap_results
- No
- h__h3_have_ext_cap_results
- No
- h__h2_have_full_cap_results
- No
- h__h2_have_half_cap_results
- No
- h__h3_have_full_cap_results
- No
- h__h3_have_half_cap_results
- No
- h__h2_ext_cap_heat_cap_rated
- 10500 W
- h__h1_half_cap_heat_cap_rated
- 5000 W
- h__h2_is_capable_extended_load
- Yes
- c__low_temp_full_cap_power_rated
- 2303.28 W
- c__low_temp_half_cap_power_rated
- 1169.92 W
- c__low_temp_have_min_cap_results
- No
- c__t1_half_cap_cooling_cap_rated
- 4500 W
- c__low_temp_have_half_cap_results
- No
- c__low_temp_full_cap_cooling_cap_rated
- 9693 W
- c__low_temp_half_cap_cooling_cap_rated
- 4846.5 W
Other model numbers on registration AAC7012
Registered together and sharing the same test results. Usually variants of the same unit.
New Zealand E3 registration details
- Registration number
- AAC7012
- GEMS registration id
- 147834
- Status
- approved, available (self-reported)
- Registration expires
- 15 September 2027
- Registered for sale in
- Australia, New Zealand
- Family
- PUMY-SP80YKMD2-A Series
- Regulatory standard
- [SEER Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
- Test standard
- AS/NZS 3823.1.4:2012
- MEPS
- 2019
- Product class
- Class 19
Source: E3 programme registration data (EECA, New Zealand) (trans-Tasman E3 registration data published by DCCEEW on data.gov.au, CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. Manufacturer: MitsubishiElectric.com.au. How the derived figures are calculated.