New Zealand Β· costs in NZD
Reverse cycle multi-split / vrf air conditioner
Mitsubishi Heavy Industries FDC140KXZES1 Heat Pump
Mitsubishi Heavy Industries FDC140KXZES1 is a 14 kW reverse cycle multi-split / vrf heat pump registered for sale in New Zealand under the trans-Tasman E3 energy rating scheme (registration AAC9736).
- Energy rating (cooling)
- 2
- Heating: 1.5
- Annual electricity use
- 6,331 kWh
- 942 cooling + 5,389 heating
- Estimated running cost
- $2,089 / year
- $174 / month Β· $20,892 over 10 years
- Capacity
- 14 kW cooling
- 14 kW heating
4% less electricity than the median of 19 comparable 14 kW reverse cycle multi-split / vrf registrations (6,606 kWh a year) in the cold zone. Uses less than 68% of them.
Across all 3,611 air conditioner registrations sold in Australia, it uses less than 29% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the cold zone (Canberra climate: Canberra, Hobart, Ballarat, alpine areas). All of New Zealand is the cold zone on the Zoned Energy Rating Label. Cost = kWh Γ 33c/kWh in NZD; change the price above to your tariff.
Mitsubishi Heavy Industries FDC140KXZES1 running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 6,331 | $2,089 | $20,892 |
| Mixed zone | 3,503 | $1,156 | $11,560 |
| Hot zone | 4,413 | $1,456 | $14,563 |
At 33c/kWh. Formula: cost = annual kWh Γ price. The kWh figure is the labelβs residential estimate for that zone; commercial-profile figures are in the specifications.
Heat pumps that use less electricity
Same configuration and type, cooling capacity within 12% of 14 kW, at least 3% lower annual kWh in the cold zone.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Daikin RSUYA5AVM16 kW heating14 kW cooling4,941 kWh/yr | 3 | $1,631 | |
| Panasonic U-5LZ2E816 kW heating14 kW cooling5,357 kWh/yr | 2.5 | $1,768 | |
| Panasonic U-5LZ2E516 kW heating14 kW cooling5,357 kWh/yr | 2.5 | $1,768 | |
| Mitsubishi Electric PUMY-SP112VKMD3-A Series14 kW heating12.5 kW cooling5,590 kWh/yr | 2.5 | $1,845 | |
| Mitsubishi Electric PUMY-SP112VKMD3-A14 kW heating12.5 kW cooling5,590 kWh/yr | 2.5 | $1,845 |
Heat pumps similar to the Mitsubishi Heavy Industries FDC140KXZES1
Technically comparable registrations: same configuration and type, capacity within 12%.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Panasonic U-5LZ2E516 kW heating14 kW cooling5,357 kWh/yr | 2.5 | $1,768 | |
| Mitsubishi Electric PUMY-SP125YKMD3-A-BS16 kW heating14 kW cooling6,470 kWh/yr | 2.5 | $2,135 | |
| Panasonic U-5LZ2E816 kW heating14 kW cooling5,357 kWh/yr | 2.5 | $1,768 | |
| Braemar MCMX140D108B16 kW heating14 kW cooling8,576 kWh/yr | 1.5 | $2,830 | |
| Daikin RSUYA5AVM16 kW heating14 kW cooling4,941 kWh/yr | 3 | $1,631 | |
| Mitsubishi Electric PUMY-SP125YKMD3-A Series16 kW heating14 kW cooling6,470 kWh/yr | 2.5 | $2,135 |
Other Mitsubishi Heavy Industries models of similar capacity
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Mitsubishi Heavy Industries FDC140KXZEN114 kW heating14 kW cooling6,366 kWh/yr | 2 | $2,101 | |
| Mitsubishi Heavy Industries FDC140KXZEN1-W14 kW heating14 kW cooling6,606 kWh/yr | 2.5 | $2,180 |
Compare FDC140KXZES1 with another model
Mitsubishi Heavy Industries FDC140KXZES1 specifications
- Type
- Reverse cycle
- Configuration
- Multi-split / VRF
- Air distribution
- Ducted or non-ducted
- Indoor unit
- β
- Rated cooling capacity (35 Β°C)
- 14.00 kW
- Cooling power input
- 4.16 kW
- Rated heating capacity (7 Β°C)
- 14.00 kW
- Heating power input
- 3.86 kW
- EER, full load (tested)
- 3.30
- COP, full load (tested)
- 3.92
- Rated AEER
- 3.27
- Rated ACOP
- 3.52
- Standby power (PIA)
- 34.6 W
- Compressor
- Variable speed, Inverter
- Refrigerant
- R410A
- Power supply
- Three phase
- Indoor sound power
- β
- Outdoor sound power
- 72 dB(A)
- Demand response (AS/NZS 4755)
- No
- Country of manufacture
- Thailand
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
Mitsubishi Heavy Industries FDC140KXZES1 zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | β | β | 1,959 | 1,754 |
| Coldresidential | residential | 2.0 | 1.5 | 942 | 5,389 |
| Mixedcommercial | commercial | β | β | 2,453 | 940 |
| Mixedresidential | residential | 2.0 | 2.0 | 1,449 | 2,054 |
| Hotcommercial | commercial | β | β | 5,382 | 242 |
| Hotresidential | residential | 2.5 | 2.5 | 4,053 | 360 |
Part-load test points (16 values)
- h__h2_ext_cap_power_rated
- 4600 W
- c__t1_half_cap_power_rated
- 1500 W
- c__t1_have_min_cap_results
- No
- h__h1_half_cap_power_rated
- 1500 W
- h__h1_have_min_cap_results
- No
- h__h3_have_ext_cap_results
- No
- h__h2_have_full_cap_results
- No
- h__h2_have_half_cap_results
- No
- h__h3_have_full_cap_results
- No
- h__h3_have_half_cap_results
- No
- h__h2_ext_cap_heat_cap_rated
- 12500 W
- h__h1_half_cap_heat_cap_rated
- 7000 W
- h__h2_is_capable_extended_load
- Yes
- c__low_temp_have_min_cap_results
- No
- c__t1_half_cap_cooling_cap_rated
- 7000 W
- c__low_temp_have_half_cap_results
- No
New Zealand E3 registration details
- Registration number
- AAC9736
- GEMS registration id
- 175910
- Status
- approved, available (self-reported)
- Registration expires
- 8 January 2031
- Registered for sale in
- Australia, New Zealand
- Family
- β
- Regulatory standard
- [SEER Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
- Test standard
- AS/NZS 3823.1.4:2012
- MEPS
- 2019
- Product class
- Class 20
Source: E3 programme registration data (EECA, New Zealand) (trans-Tasman E3 registration data published by DCCEEW on data.gov.au, CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. Manufacturer: mhiaa.com.au. How the derived figures are calculated.