Australia · costs in AUD
Reverse cycle split system air conditioner
Kaden KDI36 Air Conditioner
Kaden KDI36 is a 10.5 kW reverse cycle ducted split system air conditioner registered under Australia’s Energy Rating (GEMS) scheme (registration AAC8593).
- Energy rating (cooling)
- 3
- Heating: 2.5
- Annual electricity use
- 2,325 kWh
- 886 cooling + 1,439 heating
- Estimated running cost
- $744 / year
- $62 / month · $7,440 over 10 years
- Capacity
- 10.5 kW cooling
- 11.5 kW heating
4% less electricity than the median of 129 comparable 10 kW reverse cycle ducted split system registrations (2,429 kWh a year) in the mixed zone. Uses less than 75% of them.
Across all 3,680 air conditioner registrations sold in Australia, it uses less than 46% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the mixed zone (Richmond NSW climate: Sydney, Melbourne, Adelaide, Perth). Mixed climate zone shown by default (Sydney, Melbourne, Adelaide, Perth); switch to cold or hot. Cost = kWh × 32c/kWh in AUD; change the price above to your tariff.
Kaden KDI36 running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 4,565 | $1,461 | $14,608 |
| Mixed zone | 2,325 | $744 | $7,440 |
| Hot zone | 2,735 | $875 | $8,752 |
At 32c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.
Air conditioners that use less electricity
Same configuration and type, cooling capacity within 12% of 10.5 kW, at least 3% lower annual kWh in the mixed zone.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Panasonic U-100PZ4R8 / S-100PE4RN10 kW heating10 kW cooling1,449 kWh/yr | 2.5 | $464 | |
| Panasonic U-100PZ4R8 / S-100PE4R10 kW heating10 kW cooling1,449 kWh/yr | 2.5 | $464 | |
| Brivis AONSR13B1/AINHU11B111.3 kW heating10.3 kW cooling1,881 kWh/yr | 4.5 | $602 | |
| Midea UCMI105OB/DUCMI105IHB11 kW heating10 kW cooling2,120 kWh/yr | 4 | $678 | |
| Midea UCMI90OB/DUCMI90IB11 kW heating10.5 kW cooling2,122 kWh/yr | 4 | $679 |
Air conditioners similar to the Kaden KDI36
Technically comparable registrations: same configuration and type, capacity within 12%.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Actron Air LRC-100CS / LRE-100CS11.5 kW heating10.5 kW cooling2,126 kWh/yr | 4 | $680 | |
| Carrier 38QSV105N8/42QSV105N8H12.5 kW heating10.5 kW cooling2,355 kWh/yr | 3.5 | $754 | |
| Mdv C-UV-105N8-QC3W / CDV-105HN8-QC3W11 kW heating10.5 kW cooling2,126 kWh/yr | 4 | $680 | |
| Rinnai DONSR11B1/DINLR11B111.5 kW heating10.5 kW cooling2,165 kWh/yr | 4 | $693 | |
| Mdv C-UV-105N8-QC3W / CDV-105A6N8-QC3W11 kW heating10.5 kW cooling2,135 kWh/yr | 4 | $683 | |
| Rinnai DONSR11B1/DINLR11B111.5 kW heating10.5 kW cooling2,164 kWh/yr | 4 | $692 | |
| Midea UCMI90OB/DUCMI90IB11 kW heating10.5 kW cooling2,122 kWh/yr | 4 | $679 | |
| Aurora AU-BS36HR-2A-O / AU-LCF36-2A-I11.5 kW heating10.5 kW cooling2,151 kWh/yr | 4 | $688 |
Compare KDI36 with another model
Kaden KDI36 specifications
- Type
- Reverse cycle
- Configuration
- Split system
- Air distribution
- Ducted
- Indoor unit
- –
- Rated cooling capacity (35 °C)
- 10.50 kW
- Cooling power input
- 3.00 kW
- Rated heating capacity (7 °C)
- 11.50 kW
- Heating power input
- 2.70 kW
- EER, full load (tested)
- 3.31
- COP, full load (tested)
- 4.18
- Rated AEER
- 3.46
- Rated ACOP
- 4.21
- Standby power (PIA)
- 9.8 W
- Compressor
- Variable speed, Inverter
- Refrigerant
- R32
- Power supply
- Single phase
- Indoor sound power
- –
- Outdoor sound power
- –
- Demand response (AS/NZS 4755)
- Yes
- Country of manufacture
- China
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
Kaden KDI36 zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | – | – | 667 | 1,237 |
| Coldresidential | residential | 3.0 | 2.0 | 573 | 3,992 |
| Mixedcommercial | commercial | – | – | 721 | 628 |
| Mixedresidential | residential | 3.0 | 2.5 | 886 | 1,439 |
| Hotcommercial | commercial | – | – | 2,851 | 138 |
| Hotresidential | residential | 3.5 | 3.5 | 2,521 | 214 |
Part-load test points (25 values)
- c__t1_min_cap_power_rated
- 700 W
- h__h1_min_cap_power_rated
- 480 W
- h__h2_ext_cap_power_rated
- 3400 W
- c__t1_half_cap_power_rated
- 1800 W
- c__t1_have_min_cap_results
- Yes
- h__h1_half_cap_power_rated
- 1120 W
- h__h1_have_min_cap_results
- Yes
- h__h3_have_ext_cap_results
- No
- h__h2_have_full_cap_results
- No
- h__h2_have_half_cap_results
- No
- h__h3_have_full_cap_results
- No
- h__h3_have_half_cap_results
- No
- h__h1_min_cap_heat_cap_rated
- 2470 W
- h__h2_ext_cap_heat_cap_rated
- 9780 W
- h__h1_half_cap_heat_cap_rated
- 5750 W
- h__h2_is_capable_extended_load
- Yes
- c__low_temp_min_cap_power_rated
- 410 W
- c__t1_min_cap_cooling_cap_rated
- 3200 W
- c__low_temp_full_cap_power_rated
- 2742 W
- c__low_temp_half_cap_power_rated
- 1050 W
- c__t1_half_cap_cooling_cap_rated
- 5700 W
- c__low_temp_have_half_cap_results
- Yes
- c__low_temp_min_cap_cooling_cap_rated
- 2700 W
- c__low_temp_full_cap_cooling_cap_rated
- 11308.5 W
- c__low_temp_half_cap_cooling_cap_rated
- 5600 W
Related Kaden model numbers starting with KDI36
2 model numbers on 2 other registrations. Variants registered separately can carry different star ratings and energy figures; check the registration number on the label.
| Model | Registration | Stars | kWh / yr | Registration expires |
|---|---|---|---|---|
| KDI36 / KDI36 | AAC7192 | 4 | 2,174 | 4 December 2027 |
| KDI36 | AAC8468 | 1.5 | 2,817 | 29 September 2029 |
Australian GEMS registration details
- Registration number
- AAC8593
- GEMS registration id
- 166832
- Status
- approved, available (self-reported)
- Registration expires
- 28 January 2030
- Registered for sale in
- Australia, New Zealand
- Family
- –
- Regulatory standard
- [SEER Non Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
- Test standard
- AS/NZS 3823.1.2:2012
- MEPS
- 2019
- Product class
- Class 11
Source: Australian Government Energy Rating (GEMS) registration data, DCCEEW via data.gov.au (CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. Manufacturer: midea.com/global. How the derived figures are calculated.