New Zealand · costs in NZD
Reverse cycle split system air conditioner
Kaden KDI-14.0 Heat Pump
Kaden KDI-14.0 is a 14 kW reverse cycle ducted split system heat pump registered for sale in New Zealand under the trans-Tasman E3 energy rating scheme (registration AAC9232).
- Energy rating (cooling)
- 4
- Heating: 2.5
- Annual electricity use
- 5,768 kWh
- 687 cooling + 5,081 heating
- Estimated running cost
- $1,903 / year
- $159 / month · $19,034 over 10 years
- Capacity
- 14 kW cooling
- 15.5 kW heating
15% less electricity than the median of 124 comparable 14 kW reverse cycle ducted split system registrations (6,763 kWh a year) in the cold zone. Uses less than 86% of them.
Across all 3,612 air conditioner registrations sold in Australia, it uses less than 33% (this compares very different sizes, so the cohort figure above is the useful one).
Annual kWh is the government label figure for a residential user in the cold zone (Canberra climate: Canberra, Hobart, Ballarat, alpine areas). All of New Zealand is the cold zone on the Zoned Energy Rating Label. Cost = kWh × 33c/kWh in NZD; change the price above to your tariff.
Kaden KDI-14.0 running cost by climate zone
| Climate zone | kWh / year | Per year | 10 years |
|---|---|---|---|
| Cold zone | 5,768 | $1,903 | $19,034 |
| Mixed zone | 2,996 | $989 | $9,887 |
| Hot zone | 3,403 | $1,123 | $11,230 |
At 33c/kWh. Formula: cost = annual kWh × price. The kWh figure is the label’s residential estimate for that zone; commercial-profile figures are in the specifications.
Heat pumps that use less electricity
Same configuration and type, cooling capacity within 12% of 14 kW, at least 3% lower annual kWh in the cold zone.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Daikin RZA160CV1 / FDYAN160AV118 kW heating15.5 kW cooling4,493 kWh/yr | 2 | $1,483 | |
| Panasonic U-125PZ4R8 / S-125PE4*12.5 kW heating12.5 kW cooling4,742 kWh/yr | 3 | $1,565 | |
| Panasonic U-125PZ4R8 / S-125PE4RN12.5 kW heating12.5 kW cooling4,742 kWh/yr | 3 | $1,565 | |
| Midea DUCMI125IHB/UCMI125OB13 kW heating12.5 kW cooling4,776 kWh/yr | 4 | $1,576 | |
| Rinnai DONSR13B1/DINLR13B113 kW heating12.5 kW cooling4,830 kWh/yr | 4 | $1,594 |
Heat pumps similar to the Kaden KDI-14.0
Technically comparable registrations: same configuration and type, capacity within 12%.
| Model | Stars | Est. cost / yr | Compare |
|---|---|---|---|
| Midea DUCMI140IHB/UCMI140OB14.5 kW heating14 kW cooling5,596 kWh/yr | 4 | $1,847 | |
| Actron Air URC-140CS / LRE-140CS14.3 kW heating14 kW cooling5,513 kWh/yr | 4 | $1,819 | |
| Actron Air URC-140DS / LRE-140DS15.5 kW heating14 kW cooling5,768 kWh/yr | 4 | $1,903 | |
| Carrier 38QSV140N8E/42QSV140N8H15.5 kW heating14 kW cooling5,768 kWh/yr | 4 | $1,903 | |
| Mdv C-UV-140N8-QC3W / CDV-140HFN8-QC3W14.5 kW heating14 kW cooling5,664 kWh/yr | 4 | $1,869 | |
| Mdv C-UV-140N8-QC3W / CDV-140A6N8-QC3W14.5 kW heating14 kW cooling5,607 kWh/yr | 3.5 | $1,850 | |
| Rinnai DONSR15B1/DINLR15B114.5 kW heating14 kW cooling5,618 kWh/yr | 4 | $1,854 | |
| Midea UCMI140OB/DUCMI140IHB14.5 kW heating14 kW cooling5,658 kWh/yr | 4 | $1,867 |
Compare KDI-14.0 with another model
Kaden KDI-14.0 specifications
- Type
- Reverse cycle
- Configuration
- Split system
- Air distribution
- Ducted
- Indoor unit
- –
- Rated cooling capacity (35 °C)
- 14.00 kW
- Cooling power input
- 4.13 kW
- Rated heating capacity (7 °C)
- 15.50 kW
- Heating power input
- 3.82 kW
- EER, full load (tested)
- 3.32
- COP, full load (tested)
- 4.11
- Rated AEER
- 3.36
- Rated ACOP
- 4.02
- Standby power (PIA)
- 9.6 W
- Compressor
- Variable speed, Inverter
- Refrigerant
- R32
- Power supply
- Single phase
- Indoor sound power
- –
- Outdoor sound power
- –
- Demand response (AS/NZS 4755)
- Yes
- Country of manufacture
- China
Dimensions are not collected for registrations under the 2019 Determination, so they are shown only where the source has them.
Kaden KDI-14.0 zoned energy rating figures
As published for each climate zone. Residential figures drive the star ratings; commercial figures assume a commercial usage pattern.
| Zone | Profile | Cooling stars | Heating stars | Cooling kWh | Heating kWh |
|---|---|---|---|---|---|
| Coldcommercial | commercial | – | – | 829 | 1,591 |
| Coldresidential | residential | 4.0 | 2.5 | 687 | 5,081 |
| Mixedcommercial | commercial | – | – | 1,363 | 828 |
| Mixedresidential | residential | 3.5 | 2.5 | 1,094 | 1,902 |
| Hotcommercial | commercial | – | – | 3,523 | 177 |
| Hotresidential | residential | 4.0 | 3.5 | 3,125 | 278 |
Part-load test points (22 values)
- c__t1_min_cap_power_rated
- 1100 W
- h__h1_min_cap_power_rated
- 640 W
- h__h2_ext_cap_power_rated
- 5350 W
- c__t1_half_cap_power_rated
- 1860 W
- c__t1_have_min_cap_results
- Yes
- h__h1_half_cap_power_rated
- 1440 W
- h__h1_have_min_cap_results
- Yes
- h__h3_have_ext_cap_results
- No
- h__h2_have_full_cap_results
- No
- h__h2_have_half_cap_results
- No
- h__h3_have_half_cap_results
- No
- h__h1_min_cap_heat_cap_rated
- 3300 W
- h__h2_ext_cap_heat_cap_rated
- 15500 W
- h__h1_half_cap_heat_cap_rated
- 7570 W
- h__h2_is_capable_extended_load
- Yes
- c__low_temp_min_cap_power_rated
- 705 W
- c__t1_min_cap_cooling_cap_rated
- 3450 W
- c__low_temp_half_cap_power_rated
- 1170 W
- c__t1_half_cap_cooling_cap_rated
- 7000 W
- c__low_temp_have_half_cap_results
- Yes
- c__low_temp_min_cap_cooling_cap_rated
- 4950 W
- c__low_temp_half_cap_cooling_cap_rated
- 7500 W
Related Kaden model numbers starting with KDI140
1 model numbers on 1 other registration. Variants registered separately can carry different star ratings and energy figures; check the registration number on the label.
| Model | Registration | Stars | kWh / yr | Registration expires |
|---|---|---|---|---|
| KDI-14.0S | AAC9222 | 4 | 6,355 | 11 August 2030 |
New Zealand E3 registration details
- Registration number
- AAC9232
- GEMS registration id
- 171579
- Status
- approved, available (self-reported)
- Registration expires
- 19 August 2030
- Registered for sale in
- Australia, New Zealand
- Family
- –
- Regulatory standard
- [SEER Non Multi-Split <=65kW] GEMS (Air Conditioners up to 65kW) Determination 2019
- Test standard
- AS/NZS 3823.1.2:2012
- MEPS
- 2019
- Product class
- Class 11
Source: E3 programme registration data (EECA, New Zealand) (trans-Tasman E3 registration data published by DCCEEW on data.gov.au, CC BY 3.0 AU). Dataset published 25 September 2026; last checked 26 September 2026. Manufacturer: midea.com/global. How the derived figures are calculated.